Products

SuperTherm

SuperTherm® is the most effective and longest lasting ceramic insulation coating on the market today (a 10-year check of roofing shows no drop in performance). It is a ceramic-based (using 4 different ceramic compounds specifically selected to block radiation), water-borne insulating coating designed to block heat load, moisture penetration, and air infiltration over a surface – all while significantly reducing energy costs. Super Therm® reflects over 95% of the three radiation sources from the sun: ultraviolet, visual light and infrared rays. Read more.

Rust Grip

Rust Grip® seals virtually any surface and protects it against corrosion, weather and physical wear. This is a three-coats-in-one system that acts as a primer, intermediate, and top coat with a single application. Rust Grip® is a metallic-based, moisture-cure polyurethane encapsulating coating designed to seal air, moisture and chemicals out of surfaces. Rust Grip® stands up to acids, salts and caustic materials with no loss of strength. For EPA VOC standards, Rust Grip® falls under the metallic pigmented coating category. Rust Grip® is 414 grams/liter VOC. (Current California and US federal limit of 500 grams/liter). Read more.

Moist Metal Grip

Moist Metal Grip protects submerged surfaces. This two-part epoxy is designed to provide a water-resistant, anti-corrosion coating for wet or submerged surfaces as well as protect metal surfaces already experiencing moisture or condensation that cannot be stopped and dried. It is fast acting, durable, versatile and easy to apply.  Read more.

Enamo Grip

Enamo Grip is a tough, moisture curing, two-component polyurethane enamel, which produces a uniquely hard and durable coating film. It will demonstrate unsurpassed semi-gloss retention, color-retention, graffiti-resistance and chalk resistance when utilized for exterior coating situations. Enamo Grip provides outstanding resistance to water and humidity, stains, chemicals, and solvents and offers exceptional scuff-mark and impact-resistance. Read more.

Hot Pipe Coating

Get “high” heat protection that surpasses conventional insulation with HPC™ Coating. This ceramic-based, water-borne coating is designed to insulate in medium temperature situations. Use HPC™ Coating as a base coat/primer or build layers for additional protection. This method is much different than the traditional “wrap” insulation materials that only slow down the loss of heat (known as an R-rating or “heat transfer”). The eight ceramic compounds create a barrier to catch and hold heat on the surface of the unit, e.g. pipe, furnace surface, boiler, etc. Read more.

iSTUCCO System

The iSTUCCO™ System creates an unbeatable and affordable solution to stop heat and/or cold conduction through the coating film and provides a beautiful, long-lasting stucco finish. It combines the best properties of two outstanding products, SP Ceramic Stucco and the top coat of Super Therm®, which is designed with four separate ceramics; two are reflective, one is an infrared blocker, and the fourth acts as a dead air space between the coated surface and the substrate. The result is an applied coating that is both reflective and insulating. Read more.

Lining Kote

Lining Kote UHS protects against the most harsh acids, bases, chemicals and solvents. Its two-part epoxy composition provides durable and flexible protection for your coatings. Read more.

Super Base

Seal and cover surfaces with Super Base (HS), a high performance base coat and primer designed specifically for use with Super Therm® and Sunshield. Super Base (HS) is made with a combination of the highest-performing elastomeric acrylics to provide long-lasting protection. Read more.

Omega Fire

Build extra safety into structures with Omega Fire™, a ceramic-loaded, water-borne fireproofing coating. Omega Fire™ stays intact above 2000° F (1100° C) and has a 2-3 hour fire rating. Using the combination of HPC and Omega Fire™, a 7-hour rating was achieved on a support beam inside the furnace at 2000° F (1100° C). Read more.

Hot Surface Coating

Get heat protection that surpasses conventional insulation with HSC™ Coating. This ceramic-based, water-borne coating is designed to insulate in medium temperature situations. Use HSC™ Coating as a base coat/primer or build layers for additional protection. This method is much different than the traditional “wrap” insulation materials that only slow down the loss of heat (known as an R-rating or “heat transfer”). The seven ceramic compounds create a barrier to catch and hold heat on the surface of the unit, e.g. pipe, furnace surface, boiler, etc. Unlike wraps that use air as the insulation component, the ceramic compounds in the HSC™ Coating resist absorbing heat rising to the surface to escape. This method traps and holds the heat onto the surface for more effective insulation performance. Read more.

Epoxotherm

Epoxotherm is a ceramic-based, two-part epoxy that can be submerged and adds insulation value to any substrate over which it is coated. It is designed to insulate wet surfaces. It combines the ceramics of Super Therm® for exceptional reflective and insulative performance, with the toughness and submersible capabilities of industrial grade epoxy. Read more.

Sunshield

Reduce energy costs for less with Sunshield, a ceramic-based, water-borne, insulating coating. Sunshield contains a similar ceramic package as our best-selling Super Therm®, but was designed primarily for areas that are facing radiational heat and no harsh environmental conditions. Read more.

SP Super (Graffiti) Cleaner

SP Super (Graffiti) Cleaner  is a liquid cleaner developed to remove graffiti and is made from a blend of glycol esthers and other chemicals. It will remove most types of paint, including Krylon™ spray paints and permanent markers. It is environmentally friendly and easy to use. Read more.

Mastic Sealing Tape

Protect against water and leaks with Mastic Sealing Tape. Designed for use on seams of metal buildings, Mastic Sealing Tape bonds with coatings to completely seal the roofing structure. It works with Super Therm® and Enamo Grip to create a monolithic and long lasting roofing system, but must be overcoated initially with Super Base (HS) to seal the tape. Read more.

Comments are closed.

  • Our Products

    Super Therm®
    Rust Grip®
    Moist Metal Grip
    Enamo Grip
    Hot Pipe Coating™
    iSTUCCO System
    Lining Kote
    Super Base
    Omega Fire™
    Epoxotherm
    Sunshield
    Hot Surface Coating™
    SP Super Grafitti Cleaner
    Mastic Sealing Tape
^ Back to Top